preloader
Scroll to top

GE SECURITY & SAFETY DEVICES.

Here’s a quick guide for replacing the batteries on your Phone Experts GE Security & Safety devices. So you can get them functioning properly.

GE Motion Detectors

  1. First of all depress the tab on top of motion detector and detach so you can remove it from the wall.
  2. Pull away from wall, as a result you will be able to access the back of the unit.
  3. Depress three tabs on back simultaneously (two on top & one on the bottom) so you can separate the device.
  4. Pull apart the detector and access the batteries.
  5. Replace with 2 AA batteries.

GE Door Contacts

  1. First of all place flat head screwdriver in slot on short side of contact & press down so you can lift the cover.
  2. Pull up on contact cover and access the batteries.
  3. Replace with 1 CR123A battery. All Specialty batteries are available at our Head Office location.

GE Door Contact/Low Temp/Water Sensor

  1. First of all depress button on short side of contact
  2. Pull up on cover.
  3. Replace with 2 AAA batteries.

GE Smoke Detectors

  1. Start by twisting the unit in counter clockwise rotation so you can remove it from the wall.
  2. Pull away from ceiling or wall so you can access the batteries.
  3. Replace with 2 CR123A batteries. All Specialty batteries are available at our Head Office location.

GE Glass Break Detectors

  1. First of all pull top cover off by pulling up on short side so you can access the batteries.
  2. Replace with 2 CR123A batteries. All Specialty batteries are available at our Head Office location.

GE Key Fobs

  1. Start by inserting flat head screwdriver into side so you separate, as a result you can access the batteries.
  2. Slide battery out from enclosure and replace with a new GP23 battery.

Related posts